Yes , we are generally interested in purchasing used fitness equipment from you. Please email us a list of the equipment you have for sale, along with a few photos, to Info@DankSport.de , and we will get back to you. Thank you!

When we "overhaul" a used power tool, this means the following work steps have been carried out:

1. The strength training device was partially disassembled and thoroughly cleaned.
2. The mechanics, especially screws, ball bearings, pulleys and steel cable or flat belt were visually and technically checked and replaced with new parts if necessary.
3. Other parts such as gas pressure dampers, locking pins, rubber grips, handles, snap hooks, caps and covers were visually and technically inspected and replaced with new parts if necessary.
4. The frame and weight block of the device were checked for large scratches / heavy wear / rust and, if necessary, partially sandblasted or sanded and repainted in a suitable color.
5. The device is reassembled, the guide rods are oiled and the rope or flat belt is adjusted.
6. After final assembly, the final, thorough testing follows, using the four-eyes principle. The strength training device is now overhauled and serviced, and ready for many more years of use.

When we "refurbish" a used cardio machine, this means the following work steps have been carried out:

1. The cardio equipment was partially disassembled and thoroughly cleaned.
2. The mechanics, especially screws, tensioners, rollers, springs, buffers and much more, were visually and technically checked and replaced with new parts if necessary.
3. Ball bearings and drive belts are always replaced with original spare parts! Battery-operated machines always receive a new battery! Ergometers and recumbents also always receive new pedals. Treadmills always receive a new running surface in 90% of cases.
4. Other parts such as the display, buttons, heart rate sensors, seat, saddle, upholstery, handlebars, grips, caps, cup holders and fairings were visually and technically checked and replaced with new parts if necessary.
5. The frame of the device was checked for large scratches / heavy wear / rust and, if necessary, partially sandblasted or sanded and repainted in a suitable color.
6. The device is reassembled, the ball bearings are lubricated again and the drive belts are tensioned.
7. After final assembly, the final, thorough testing follows, using the four-eyes principle. The cardio machine is now overhauled and serviced, and ready for many more years of use.

Yes, both private and commercial customers receive individual discounts for larger order quantities. Please contact us for a customized offer. Feel free to contact us by phone or email us at Info@DankSport.de